HP0-Y26 exam study guide

HP HP0-Y26 exam is a Technical Specialist exam. HP HP0-Y26 exam can help and promote IT staff have a good career. With a good career, and of course you can create a steady stream of corporate and national interests, so as to promote the development of the national economy. If all of the IT staff can do like this the state will become stronger. ITCertKing HP HP0-Y26 exam training materials can help IT personnel to achieve this purpose. We guarantee you 100% to pass the exam. Make the tough decision to choose our ITCertKing HP HP0-Y26 exam training materials please.

Are you IT person? Do you want to succeed? If you want to succeed, please do to buy ITCertKing's HP HP0-Y26 exam training materials. Our training materials have through the test of practice. it can help you to pass the IT exam. With the ITCertKing's HP HP0-Y26 exam training materials, you will have better development in the IT industry. You can enjoy the treatment of high-level white-collar, and you can carve out a new territory in the internation. Are you still worried about your exam? ITCertKing's HP HP0-Y26 exam training materials will satisfy your desire. We are through thick and thin with you and to accept this challenge together .

In order to provide you with the best IT certification exam dumps forever, ITCertKing constantly improve the quality of exam dumps and update the dumps on the basis of the latest test syllabus at any time. ITCertKing is your best choice on the market today and is recognized by all candidates for a long time. If you don't believe what I say, you can know the information by asking around. Somebody must have been using ITCertKing dumps. We assure ITCertKing provide you with the latest and the best questions and answers which will let you pass the exam at the first attempt.

Exam Code: HP0-Y26
Exam Name: HP (Building a Complete HP ProCurve Mobility Solution)
One year free update, No help, Full refund!
Total Q&A: 73 Questions and Answers
Last Update: 2013-12-25

Don't need a lot of time and money, only 30 hours of special training, and you can easily pass your first time to attend HP certification HP0-Y26 exam. ITCertKing are able to provide you with test exercises which are closely similar with real exam questions.

HP0-Y26 Free Demo Download: http://www.itcertking.com/HP0-Y26_exam.html

NO.1 You must configure an Hp ProCurve switch 8212zl to be the Owner of a VRID associated with VLAN 10.
What must e true of the virtual IP address for the VRID?
A. It must be an address on a muti-ntted interface
B. It must match the router s address for the VLAN 10 interface
C. It must match the address assigned to VLAN 10 on the Backup router.
D. It must use a classful network mask
Answer: B

HP   HP0-Y26 certification   HP0-Y26 test questions   HP0-Y26 test   HP0-Y26   HP0-Y26

NO.2 Click the Exhibit button
What is the role of the HP ProCurve Switch 3500yl in the OSPF routing domain?
A. ABR in areas 5 and 0
B. ASBR in areas 5 and 0
C. internal router in area 5
D. internal router in area 0
Answer: A

HP   HP0-Y26   HP0-Y26 questions

NO.3 You have enable Dynamic ARP Protection on an HP ProCurve 5406zl switch.When is it necessary to
define IP-to MAC address bindings?
A. when you must lock down the switch s IP addresses to its base MAC address
B. when you must specify clients connected to untrusted ports
C. when you must identify devices that do not use DHCP,but have a static IP address assigned.
D. when you must protect uplink ports that connect to other swithes that do not support Dynamic ARP
Protection.
E. when you must provide sevurity to ports where different clients may connect at different times
Answer: C

HP pdf   HP0-Y26 exam simulations   HP0-Y26   HP0-Y26

NO.4 You have verified that an HP ProCurve Switch 3500yl is correctly configured for PIM dense mode. The
witch s IGMP table shows active hosts that are memebers of multicast group 239.193.22.22. The muticast
is in progress, and all hosts are reciving the content ,However, the muticast group does not appear in the
witch s PIM route table.
What does this indicate about the 239.193.22.22 muticast group?
A. The switch is forwarding the muticast at Layer2.
B. Other muticast routers are configured for PIM sparse.
C. The server and IGMP hosts are in different VLANs.
D. The switch is Querier for the group.
Answer: A

HP   HP0-Y26   HP0-Y26   HP0-Y26   HP0-Y26

NO.5 A customer requires high levels of redundancy and availability for a critical business network that uses
two HP ProCurve 8212zl switches in the core. What is a potential advantage of deploying the VRRP on
thest switches?
A. It will enable the switches to learn redudant paths to remote networks
B. It will enable the switches to provide redundant default gateways to clicents.
C. It will enable the configuration of redundant gateways on VRRP-aware clients
D. It will enable the switches to provide redundant links to the distribution layer.
Answer: B

HP exam dumps   HP0-Y26 answers real questions   HP0-Y26 answers real questions   HP0-Y26   HP0-Y26

NO.6 You must use the web management interface of an HP MSM710 Controller to perform a manual
upgrade of the controller s software. In the management interface . which location must be specified as
the source for the software file?
A. TFTP server
B. your workstation
C. controller auxilary port
D. your FTP server
Answer: B

HP test   HP0-Y26   HP0-Y26

NO.7 You must configure an HP ProCurve Switch 8212zl to be the Backup router for a VRID associated with
VLAN 10. What must be true of the virtual IP address for the VRID on this router?
A. It must be an address assigned to a muti-netted interface
B. It must be an address that is not assigned to any interface on either router.
C. It must match the Backup router s address for the VLAN 10 interface.
D. It must match the Owner router s address for the VLAN 10 interface
Answer: D

HP   HP0-Y26   HP0-Y26 exam prep

NO.8 On an HP ProCurve switch 8212zl, which feature must be enabled before you can enable VRRP?
A. IP routing
B. a dynamic routing protocol
C. MSTP
D. IP muticast
Answer: A

HP   HP0-Y26 practice test   HP0-Y26 questions   HP0-Y26

NO.9 what is the effect of the following command , entered at the CLI of an Hp ProCurve Switches 5412zl?
5412zl(ospf)#redistribute rip
A. The router will assume the role of ASBR
B. The router will become eligible for election as DR
C. The router will assume the role of ABR
D. The router will summarize RIP routes in OSPF LSAs
Answer: A

HP exam dumps   HP0-Y26 test questions   HP0-Y26

NO.10 You must design an MSTP solution for a customer network that uses HP ProCurve 5412zl switches in
the core and 3500yl switches at the edge. All switches will belong to single MST region. How can you
determine how may MST instances will be required to ensure that all links are in a forwarding state for at
least one VLAN?
A. Determine how many switches have identical VLAN configurations
B. Count the nubmer of redundant paths between the core and one edge switch.
C. Count the switches at the network edge
D. Determine the total number of VLANs configured on the switches.
Answer: B

HP   HP0-Y26   HP0-Y26   HP0-Y26

ITCertKing offer the latest 70-489 exam material and high-quality C_HANATEC_1 pdf questions & answers. Our 00M-503 VCE testing engine and 646-365 study guide can help you pass the real exam. High-quality HH0-050 dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.itcertking.com/HP0-Y26_exam.html