Juniper certification JN0-643 exam questions and answers come out

We are committed to using ITCertKing Juniper JN0-643 exam training materials, we can ensure that you pass the exam on your first attempt. If you are ready to take the exam, and then use our ITCertKing Juniper JN0-643 exam training materials, we guarantee that you can pass it. If you do not pass the exam, we can give you a refund of the full cost of the materials purchased, or free to send you another product of same value.

Are you an IT staff? Are you enroll in the most popular IT certification exams? If you tell me “yes", then I will tell you a good news that you're in luck. ITCertKing's Juniper JN0-643 exam training materials can help you 100% pass the exam. This is a real news. If you want to scale new heights in the IT industry, select ITCertKing please. Our training materials can help you pass the IT exams. And the materials we have are very cheap. Do not believe it, see it and then you will know.

If you have a faith, then go to defend it. Gorky once said that faith is a great emotion, a creative force. My dream is to become a top IT expert. I think that for me is nowhere in sight. But to succeed you can have a shortcut, as long as you make the right choice. I took advantage of ITCertKing's Juniper JN0-643 exam training materials, and passed the Juniper JN0-643 exam. ITCertKing Juniper JN0-643 exam training materials is the best training materials. If you're also have an IT dream. Then go to buy ITCertKing's Juniper JN0-643 exam training materials, it will help you achieve your dreams.

ITCertKing's expert team has developed a latest short-term effective training scheme for Juniper certification JN0-643 exam, which is a 20 hours of training for the candidates of Juniper certification JN0-643 exam. After training they can not only quickly master a lot of knowledge, but also consolidate their original knowledge. So they can easily pass Juniper certification JN0-643 exam and it is much more cost-effective for them than those who spend a lot of time and energy to prepare for the examination.

Exam Code: JN0-643
Exam Name: Juniper (Enterprise Routing and Switching, Professional (JNCIP-ENT))
One year free update, No help, Full refund!
Total Q&A: 114 Questions and Answers
Last Update: 2013-09-24

ITCertKing's Juniper JN0-643 exam training materials is no other sites in the world can match. Of course, this is not only the problem of quality, it goes without saying that our quality is certainly the best. More important is that ITCertKing's exam training materials is applicable to all the IT exam. So the website of ITCertKing can get the attention of a lot of candidates. They believe and rely on us. It is also embodied the strength of our ITCertKing site. The strength of ITCertKing is embodied in it. Our exam training materials could make you not help recommend to your friends after you buy it. Because it's really a great help to you.

JN0-643 Free Demo Download: http://www.itcertking.com/JN0-643_exam.html

NO.1 Which two LSA types are only generated by an ABR router? (Choose two.)
A. ASBR summary LSA (Type 4)
B. ASBR LSA (Type 5)
C. Summary LSA (Type 3)
D. Router LSA (Type 1)
Answer: A,C

Juniper exam   JN0-643 questions   JN0-643   JN0-643

NO.2 When 802.1X, MAC-RADIUS, and Captive Portal are enabled on an interface, which
authentication sequence occurs?
A. The authentication sequence is based on the order of the configuration.
B. If MAC-RADIUS is rejected, Captive Portal will start. If Captive portal is timed out, 802.1X will start.
C. If 802.1X times out, then MAC-RADIUS will start. If MAC-RADIUS is timed out by the RADIUS server,
then Captive Portal will start.
D. If 802.1X times out, then MAC-RADIUS will start. If MAC-RADIUS is rejected by the RADIUS server,
then Captive Portal will start.
Answer: D

Juniper   JN0-643   JN0-643   JN0-643   JN0-643 exam simulations   JN0-643 dumps

NO.3 A medium-sized enterprise has some devices that are 802.1X capable and some that are not. Any
device that fails authentication must be provided limited access through a VLAN called NONAUTH. How
do you provide this access?
A. Configure NONAUTH VLAN as the guest VLAN.
B. Configure NONAUTH VLAN as the server-reject VLAN.
C. Configure NONAUTH VLAN as the guest VLAN and the server-reject VLAN
D. Configure a separate VLAN for each type of user: 802.1X and non-802.1X.
Answer: C

Juniper   JN0-643   JN0-643   JN0-643

NO.4 Click the Exhibit button.
Based on the output shown in the exhibit, which protocol is configured?
A. MSTP
B. RSTP
C. STP
D. VSTP
Answer: D

Juniper demo   JN0-643 exam   JN0-643 practice test   JN0-643 practice test   JN0-643

NO.5 Port authentication falls back to Captive Portal. In which two scenarios would the port
authentication move back to 802.1X? (Choose two.)
A. if any MAC RADIUS request packet is received on the interface and if there are no sessions in
authenticated/authenticating state
B. if Captive Portal is deactivated on the interface
C. if the user gets logged out
D. if the EAP packet is received on the interface and if there are no sessions in
authenticated/authenticating state
Answer: B,D

Juniper   JN0-643 exam   JN0-643 braindump   JN0-643 test questions

NO.6 A user complains about connectivity problems from their IP address (10.1.1.87) to a server
(10.65.1.100).Which Junos command can help verify connectivity in the network? (Choose two.)
A. mroute
B. traceoptions
C. ping
D. clear bgp neighbor
Answer: B,C

Juniper exam prep   JN0-643 practice test   JN0-643 demo

NO.7 Click the Exhibit button.
The exhibit shows the output of an OSPF router LSA.
Which interface ID represents the router's loopback address?
A. ID 10.1.1.0
B. ID 10.0.3.4
C. ID 10.0.3.3
D. ID 10.0.2.4
Answer: B

Juniper   JN0-643   JN0-643   JN0-643 practice test

NO.8 If your WAN-edge router is multihomed to different ISPs, which two BGP attributes would you modify to
affect outbound traffic? (Choose two.)
A. MED
B. origin
C. local preference
D. community
Answer: B,C

Juniper certification   JN0-643   JN0-643   JN0-643 braindump   JN0-643 original questions

NO.9 Click the Exhibit button.
Host 1, Host 2, and Host 3 are connected to Switch A on interface ge-0/0/2. Host 1 and Host 2 have been
authenticated through 802.1X, however Host 3 does not have an 802.1X supplicant.
Referring to the configuration in the exhibit, how can Host 3 be authenticated?
A. secure-authentication option of HTTP or HTTPS must be configured for Captive Portal.
B. MAC RADIUS authentication must be configured for Host 3 instead of Captive Portal.
C. A new authentication-profile must be configured because 802.1X and Captive Portal cannot have the
same authentication-profile.
D. The 802.1X server failback feature must be configured for Host 3 to allow non-802.1X clients to
authenticate.
Answer: B

Juniper original questions   JN0-643   JN0-643   JN0-643

NO.10 Click the Exhibit button.
A user on port ge-0/0/12 fails an 802.1x authentication attempt.
What is the next action of Switch A?
A. It puts the Authenticator in the HELD status where all EAPOL packets are discarded until the default
hold timer expires.
B. It communicates with the RADIUS server to confirm the user's password.
C. It transmits an EAP-Identity-Request packet immediately after it sends out EAP-Failure.
D. It tries to authenticate the user using MAC radius authentication.
Answer: C

Juniper   JN0-643 pdf   JN0-643 pdf

NO.11 Click the Exhibit button.
Based on the configuration in the exhibit, why are you seeing drops in the best-effort queue on the SRX
Series platform.?
A. The drop-profile fill level is set too low.
B. Packets are dropped by a firewall policy.
C. The best-effort queue is being shaped.
D. The scheduler is not being applied correctly.
Answer: C

Juniper   JN0-643   JN0-643 demo   JN0-643   JN0-643 test questions

NO.12 Click the Exhibit button.
Referring to the output in the exhibit, why does the router prefer the path toward interface ge0/0/0.0 for the
20.0.0.0/8 route?
A. The origin is IGP.
B. The origin is unknown.
C. The AS path is longer.
D. Multihop is enabled.
Answer: A

Juniper   JN0-643 original questions   JN0-643 certification training   JN0-643 study guide   JN0-643   JN0-643

NO.13 What is the default LLDP timeout?
A. 60 seconds
B. 90 seconds
C. 120 seconds
D. infinite
Answer: C

Juniper   JN0-643   JN0-643 pdf   JN0-643   JN0-643 certification

NO.14 Click the Exhibit button.
Based on the output shown in the exhibit, why is VSTP not working for VLAN 100?
A. No interfaces are assigned to VLAN 100.
B. Your MSTI is misconfigured.
C. RSTP is configured in addition to VSTP.
D. No native VLAN is configured.
Answer: A

Juniper   JN0-643 certification   JN0-643   JN0-643

NO.15 Click the Exhibit button.
In the exhibit, which statement about the ABR between Area 8 and Area 2 is true?
A. The router has connectivity to all areas.
B. The router has connectivity to Area 8 only.
C. The router has connectivity to Area 2 only.
D. The router has connectivity to all routers in Area 8 and Area 2.
Answer: D

Juniper questions   JN0-643 exam simulations   JN0-643 pdf   JN0-643   JN0-643 certification

ITCertKing offer the latest 3103 exam material and high-quality 70-481 pdf questions & answers. Our HP2-B25 VCE testing engine and 70-482 study guide can help you pass the real exam. High-quality VCP510PSE dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.itcertking.com/JN0-643_exam.html